Schomburg Grout Crystal Flex 25kg Cement Grey - For 3 to 20 mm joints

Plus- en minpunten
Volgens onze specialist!

Productomschrijving

Grout makes your project complete. Buy grout here for ceramic wall and floor tiles. Grout is often underestimated. The right color and quality ensure the perfect finish for your tiling. Sometimes even more important than the tiles themselves.

Long lifespan Kristal Flex cement grey

This Kristal Flex has a coarser grain and is therefore suitable for joints from 3 to 20 mm. This coarser structure ensures a more durable joint. The abrasion resistance is higher.

The normal Kristal grout has a very fine grain and is therefore suitable for narrow joints. This is available in almost every color. The abrasion resistance of this grout is slightly lower than that of the Kristal Flex variant.

Unlike Kristal grout, Kristal Flex is suitable for indoor and outdoor use. It is a CG2WA grout, for connoisseurs. The highest grade of its kind.

Grout for ceramic tiles with a joint width of 3mm or wider. Very good quality from Germany. The Germans go an extra mile when it comes to a reliable and high-quality grout product.

Advantages at a glance

• meets the criteria of CG2WA,
• very high quality, for indoor and outdoor use,
• fast-curing,
• water-repellent,
• very flexible,
• easy to apply,
• very smooth and light processing,
• very resistant to thermal stress,
• quick usability of the ceramic,
• suitable for wet areas, suitable for underfloor heating,
• for walls and floors,
• cures hard and crack-free,
• frost-resistant,
• sealant available in the same color

Disadvantages and points of attention

• do not re-powder and wipe with dry mortar.
• we recommend using neutral and alkaline cleaning agents, in prescribed concentrations, for regular cleaning and maintenance of the joint.
• the surface should be rinsed with clean water after cleaning
• always clean the substrate before starting grouting work

Which additional materials are essential when working with tiles?

When realizing tiling projects, there are four important products you often need. You need a good primer to make your substrate less absorbent, a self-leveling compound to get your floor flat, tile adhesive to fix the tiles, and sealant to finish the edges and expansion joints precisely. All these necessary supplies for your tiling job can be purchased at Solza.

How much cement grey Schomburg grout do I need?

The required amount can vary significantly, depending on the width, length, and thickness of the tile. The chosen joint width can also influence the required amount. To give you an idea of the amount you might need, we have compiled the following example.

For a tile width of 60cm, a tile length of 60cm, a tile thickness of 1cm, and a joint width of 3mm, you will need approximately 0.2 kg of this anthracite-colored Schomburg grout per square meter. In this case, with this bag, you could grout approximately 250 square meters of tiles.

Alternative: Choose normal Kristal grout for finer joints from 1 to 6 mm

The normal Kristal grouts are the ideal choice for joints from 1 to 6 mm wide. Thanks to their fine structure and finer grain, they provide sleek joints with a smooth appearance and texture.

For tailor-made advice on grouting floor tiles or wall tiles from Solza, please feel free to contact us.

*De minimale afname voor onze vloeren is 10m2. Voldoet de bestelling hier niet aan? Dan kan het zijn dat wij een kleine order toeslag in rekening brengen.